90mm butyl tape production line includes the following equipment
Item | Quantity (set) |
1. 90-16D cold feed extruder | 1 |
2. Rubber sheet head | 1 |
3. Traction conveyor machine | 1 |
4. Cutting and Stacking conveyor | 1 |
5.10P chiller+1CBM water tank | 1 |
General equipment configuration
No. Item Name Model Specification |
1 Center height 1050 ± 20mm |
2 The maximum size of the product 15000X10X1.2 (length, width and height) |
3 Equipment power supply 380V, 50HZ |
4 Required steam source 0.5-0.6MPa |
5 Required water source 0.2MPa |
6 Low-voltage electrical appliances Schneider |
7 Motor brand Siemens |
8 Inverter brand Delta |
9 Brand of reducer Jie brand |
11 Operating direction right to left |
12 Operation interface Focus on extruder control |
13 The equipment meets the production process, the equipment power supply gas path layout is reasonable, and the direction is horizontal and vertical; convenient for employees |
14 Electric adopts control cabinet, including drive system, joint control system, speed control system, etc. |
15 The electric control cabinet is arranged in the bracket and does not affect the movement of the operator. The control panel requires an upgraded version. |
16 There must be a certain amount of wiring, and the color code should be used to distinguish the purpose and have terminal marks |
17 All iron structure baking paint treatment, all finished parts are blackened or chrome plated |
18 Product protection needs to reach IP54 level |