90mm (14D) Silicone Rubber Extruder

2 Use of equipment Extrusion of silica gel and stirring, use extrusion molding with the machine head

3 Dimensions 2500×1790×2300mm (L×W×H)

4 Extrusion system

5 Feeding method The side pressure roller transmits power through the screw

6 Feeding structure The side pressure roller gear meshes with the screw gear and is equipped with an automatic lubrication device.

7 Screw material 38CrMOAL

8 Screw hardness HRC65-68

9 Hardness of steel sleeve HRC65-70

10 Nitriding depth 0.4-0.7mm

11 Screw structure meets silicone extrusion performance

12 Pressure control with pressure sensor, adjustable pressure protection value 0-50MPA

13 Extruder fixed stationary

14 Aspect ratio 14:01

15 Screw diameter 90mm

16 Screw speed 5-55r/min

17 Maximum output about 180kg/h (without pressure)

18 Drive system

19 The screw and gearbox are connected by spline connection

20 Motor and gearbox drive belt drive

21 Hardened gear reducer model ZLYJ250-20-1

22 Motor power 37KW

23 Total equipment power about 40KW

24 Speed regulation mode Frequency conversion speed regulation