 |
Product Description
1、Technical parameters of energy-saving mold heating furnace equipment： The heat source of the mold heating furnace is heated by a heating wire. Its characteristics are high efficiency and energy saving. An infrared coating is installed in the furnace, which can effectively reflect the heat to the mold. The coating and mold form a set of infrared heating body, which is a heating method that radiates the heat to the mold in the form of electromagnetic energy, and the mold absorbs and converts the electromagnetic energy into heat energy. The mold frame is designed with high temperature resistant stainless steel lattice structure, which has good mechanical strength, good ventilation and lighting effects.
2、Advantages of energy-saving mold heating furnace equipment (1)Protection of mold safety: uniform and appropriate heating avoids mold cracking and oxidation caused by rapid heating, reduces unnecessary mold repair, and greatly improves the service life of the mold 2 (2)energy saving ① Reasonable drawer tray design greatly reduces heat loss ； ② Effective use of heat energy. The independently developed infrared radiation plate absorbs heat and directly radiates it to the furnace to heat the mold ③ High density polymer glass fiber insulation measures can effectively reduce the loss of heat, so as to achieve the purpose of direct energy conservation. (3) Safe, fast and comfortable operation: The drawer type take and place mold avoids the discomfort caused by the hot air coming out of the body when the traditional mold is opened. So as to achieve the purpose of improving the efficiency of safe operation (4)High efficiency: multiple sets of molds are heated at one time, avoiding the situation that there is no hot mold change when the mold change frequency is high.
4、Main parameters of energy-saving infrared mold heating furnace equipment
序号 SN | 项目名称 NAME | |
1 | Structural form of mold furnace 模炉结构形式 | Drawer structural energy-saving type. 抽屉结构式节能型。 |
2 | Heating mode 加热工作方式 | Heating with heating wire. 发热丝加热。 |
3 | Heating furnace size 加温炉膛尺寸（mm） | L930mm×W580mm×H330mm。 |
4 | Overall dimension of furnace body 炉体外形尺寸（mm） | W1400×L（1450+RAIL1100）×H1500mm |
5 | Heating time 加升温时间（h） | Heat the mold from room temperature to 500 ℃ for 60 minutes. |
6 | heating power 加热功率（15kw） | 15kw（6GROUP） |
7 | Heating temperature range | Rated heating temperature: 450~530 ℃, temperature difference in furnace: ± 5 ℃. |
加温温度范畴(℃) | 额定加热温度：450~530℃,炉内温差： ±5℃。 | |
8 | Temperature control mode 温控工作方式 | With heating, constant temperature and over temperature protection. 设有加温、恒温及超温保护。 |
9 | Opening mode of furnace door 炉门开启方式 | Pneumatic cylinder drives furnace inlet and outlet. 气动气缸驱动炉膛出入。 |
10 | Total power of power supply 用电源总功率 | Heating wire 15.75KW. |
