¢ 90(14D) Silicone Rubber Extruder
1 Device model E3-90-14D-01-00 |
2 Use of equipment Extrusion of silica gel and stirring, use extrusion molding with the machine head |
3 Dimensions 2500×1790×2300mm (L×W×H) |
4 Extrusion system |
5 Feeding method The side pressure roller transmits power through the screw |
6 Feeding structure The side pressure roller gear meshes with the screw gear and is equipped with an automatic lubrication device. |
7 Screw material 38CrMOAL |
8 Screw hardness HRC65-68 |
9 Hardness of steel sleeve HRC65-70 |
10 Nitriding depth 0.4-0.7mm |
11 Screw structure meets silicone extrusion performance |
12 Pressure control with pressure sensor, adjustable pressure protection value 0-50MPA |
13 Extruder fixed stationary |
14 Aspect ratio 14:01 |
15 Screw diameter 90mm |
16 Screw speed 5-55r/min |
17 Maximum output about 180kg/h (without pressure) |
18 Drive system |
19 The screw and gearbox are connected by spline connection |
20 Motor and gearbox drive belt drive |
21 Hardened gear reducer model ZLYJ250-20-1 |
22 Motor power 37KW |
23 Total equipment power about 40KW |
24 Speed regulation mode Frequency conversion speed regulation |