Serial number Item name Model specification |
Equipment name ￠120×16D extruder |
1 Device model EG2-120-16D-02-00 |
2 Equipment use Extrude rubber and play the role of mixing and plasticizing, and use with the die for extrusion molding |
3 Dimensions 3450×1768×2220 (length X width X height) |
4 Extrusion system |
5 Feeding mode The side pressure roller is driven by the feeding motor to realize active feeding (sprocket drive) |
6 Feeding motor model R97D132S-83.15 (17) 5.5KW 380V 50HZ |
7 Screw material 38GrMOAL |
8 Screw hardness HRC65-68 |
9 Steel sleeve hardness HRC65-70 |
10 Nitriding depth 0.4-0.7mm |
11 Screw structure without exhaust |
12 Pressure control With pressure sensor, pressure protection value is adjustable 0-50MPA |
13 The extruder is stationary |
14 aspect ratio 16:01 |
15 Screw diameter 120mm |
16 Screw speed 5-55r/min |
17 The maximum output is about 600kg/h (without pressure) |
18 Temperature control system |
19 Number of heating sections/power 3kw×6 |
20 Number of cooling stages 1 stage (side pressure roller) |
21 Temperature control method: solenoid valve automatically controls heating and cooling |
22 Circulating water pump brand Oakland |
23 Cooling water pressure 0.15-2KG/C㎡ |
24 Temperature control accuracy ±1℃ |
25 drive system |
26 The screw is connected to the gearbox using involute connection |
27 Motor and gearbox drive adopts belt drive |
28 Hard tooth surface reducer model Reducer (involute) ZLYJ330-20-5 |
29 Motor power Motor [315S-4]-B3 (110KW) |
30 The total power of the equipment is about 140KW |
31 Speed regulation mode Frequency conversion speed regulation |