Φ75 mm rubber extruder（16D）
Item | ￠75mm16D cold feed rubber extrude machine | |
1 | Unit type | BNE75-01-00 |
2 | Application | Rubber extrusion mixing and plasticization, and extrude certain size of products in accordance with the machine head |
3 | External dimensions | 2200(L)×1000(W)×1520(H)MM |
4 | Extrusion system | |
5 | The feeding way | Side rolls transmission power through the screw, active feeding, with broken material alarm |
6 | Feeding structure | Side pressure roller gear and the screw the gear meshing transmission with automatic lubricating device. |
7 | Screw material | 38GrMoAlA |
8 | Screw hardness | HRC65-68 |
9 | hardness of steel sleeve | HRC65-70 |
10 | Nitriding depth | 0.4—0.7mm |
11 | Screw structure | Transfer screw |
12 | Pressure control | With the pressure sensor, pressure protection value 0-35MPA adjustable,also with a temperature sensor |
13 | Extruder Fixation | one extruder push straight after rotating |
14 | L/D | 16:1 |
15 | Screw diameter | 75mm |
16 | Screw Speed | 1-55r/min |
17 | Max output | 140kg/h |
18 | Temperature control system | |
19 | The heating section number/power | 3kw×3 |
20 | Cooling section | 1 section (side rolls) |
21 | Temperature control | Automatic control heating, cooling by electromagnetic valve |
22 | Circulating pump brand | Aulank |
24 | Cooling water pressure | 0.15-2KG/C㎡ |
25 | The temperature control accuracy | ±1℃ |
26 | Drive system | |
27 | Connection between the screw and the gear box | spline connection |
28 | Drive of the motor and the reducer | Belt driven |
29 | Hardened reducer model | ZLYJ200-20-1 |
30 | Motor power | 37KW |
31 | The total power | 50KW |
32 | The performance of the extruder | temperature control precision±1℃， extruder at the same speed of extrusion pressure fluctuation in <=0.1MPa. |
33 | speed regulation | Frequency conversion |