| No Equipment details or parameters Material/Brand |
| 1 Device model |
| Theoretical Efficiency Maximum extrusion output under no pressure is 800Kg/hour |
| Size 3900MM×2000MM×2200MM (length×width×height) |
| Feeding method (cold feeding or hot feeding) The side pressure roller transmits power through the screw |
| Is it forced to feed? The gear of the side pressure roller meshes with the screw gear, and is equipped with an automatic lubricating device. |
| Main motor (frequency conversion) Motor [315L-4]-B3 (160KW) |
| gear pump |
| Screw material and hardness 38CrMOAL/HRC65-68 |
| Heating power and quantity of a single mold temperature machine The heating power of a single mold temperature machine is 6KW, and the number is 6 groups |
| Refrigeration power of a single mold temperature machine |
| Display parameters pressure, screw speed, mold temperature machine temperature (the mold temperature machine comes with) |
| Equipment parameters: pressure, extrusion rubber temperature, screw speed, cold water temperature, motor current and other values can be communicated and output? Can communicate, PLC brand optional |
| Filter change operating mode Hydraulic filter change |
| How to replace the die: Manually disassemble and assemble the fixing screw to replace the die |
| The machine head is turned on to the cleaning mode and the general cleaning time is 10 minutes |
| Equipment control mode Hydraulic control of the machine head, equipment speed regulation mode frequency conversion speed regulation |