120mm silicone extruder
Equipment name ￠120×14D silicone extruder |
1 Equipment use Extrude silica gel and stir it, and use it with the machine head for extrusion molding |
2 Extrusion system |
3 Feeding method The side pressure roller transmits power through the screw |
4 Feeding structure The side pressure roller gear meshes with the screw gear and is equipped with an automatic lubrication device. |
5 Screw material 38CrMOAL |
6 Screw hardness HRC65-68 |
7 Hardness of steel sleeve HRC65-70 |
8 Nitriding depth 0.4-0.7mm |
9 Screw structure is in line with silicone extrusion performance |
10 Pressure control With pressure sensor, the pressure protection value is adjustable 0-50MPA |
11 The extruder is fixed and stationary |
12 Length to diameter ratio 14:1 |
13 Screw diameter 120mm |
14 Screw speed 5-50r/min |
15 The maximum output is about 500kg/h (without pressure) |
16 Drive system |
17 The screw is connected to the gearbox with an involute connection |
18 Motor and gearbox drive adopts belt drive |
19 Hard tooth surface reducer model Reducer (involute) ZLYJ330-20-5 |
20 Motor power 90KW |
22 Speed control mode Frequency conversion speed control |