Equipment name | ￠150mm Exhaust cold feed extruder | |
1 | Equipment type | E150-03-00 |
2 | Equipment use | rubber mixing and plasticizing do and play with , and with the use of extrusion head |
3 | Dimensions | 4200×1600×1500(L×W×H)mm |
4 | Extrusion system | |
5 | Feeding Mode | Side rolls to transmit power through the screw , active feeding |
6 | Feeding structure | Feed roller gear and the screw gear, and with automatic lubricating device. |
7 | Screw Material | 38GrMoAcA |
8 | Screw hardness | HRC65-68 |
9 | steel bushing hardness | HRC65-70 |
10 | Nitriding depth | 0.4—0.7mm |
11 | Screw structure | With exhaust ducts , a good vacuum performance |
12 | Pressure Control | with the pressure sensor and the pressure protection value to adjust 0-35MPA |
13 | length-diameter ratio | 20:1 |
14 | Screw diameter | 150mm |
15 | Screw speed | 0-45r/min |
16 | Max output | About 1000kg/h |
17 | Temperature control system | |
18 | Heating section number /power | 3kw×7 |
19 | Cooling section number | 1 section（feed roller） |
20 | Vacuum pump power | 2.2KW |
21 | Temperature control mode | Automatic control valve for heating, cooling |
22 | Circulating pump brands | Weile |
23 | Pressure of cooling water | 0.15-2KG/C㎡ |
24 | Temperature control accuracy | ±1℃ |
25 | Driving system | |
26 | Screw and gear box connected | Using spline connection |
27 | Motor and gear box drive | Using 5 pcs 5V belt drive |
28 | Hardened reducer Model | ZLYJ420-28-I |
29 | Motor Power | 160KW |
30 | Total power | 184KW |
31 | Range of speed regulation | Frequency control |